AT A GLANCE

Since it incorporates an internally shock-mounted capsule and a rugged metal housing, the MK 4 is not only an obvious choice for the studio, but also a dependable companion on stage.

The MK 4 features a large 1" diaphragm plated in 24kt gold to enhance conductivity, resist corrosion, and yield a tone based on the e 965 vocal mic. The cardioid polar pattern strongly rejects sound behind the mic while picking up side-entry sound without coloration. The mic's low-noise circuitry further solidifies it as a studio mic capable of meeting the demands of digital recording systems. Use an XLR mic cable (available separately) to connect the MK 4 to any mic preamp that can supply 48V phantom power.

Versatility Is King

From acoustic guitars to vocals and even drum overheads, the MK 4's frequency response has been tailored to ensure a natural reproduction of the sound source, making it ideal for any home or project studio. It's ability to accurately reproduce such a wide range of sounds is thanks mostly in part to its 1" true condenser capsule, which is based on the acoustics of the e 965 high-end vocal mic. No frills, no gimmicks. Just solid engineering and an elegant design.

True Condenser Capsule

The MK 4 features a 24kt gold-sputtered diaphragm at the heart of its 1" true condenser capsule. Gold is an excellent conductor for electrical signals and also prevents corrosion over time. Factor in the cardioid polar pattern and you've got a single microphone that's ready to record anything you put in front it.

Cardioid Polar Pattern

The finest sound structures are well resolved, while sound coming from the sides is picked up without coloration, which means that it does not alter the overall sound quality. Furthermore, the microphone has a very harmonious presence, featuring vivid mids and is also highly detailed in the bass range. At the same time, typical cardioid cancellation is relatively frequency-independent, which is unusual for a large-diaphragm mic.

Sturdily Built

Despite its detailed and fine studio sound, the MK 4 mic is an incredibly rugged tool. The compact electronics, superior materials, and zinc die-cast casing ensure that the MK 4 is the perfect partner for rough recording environments.

Features at a Glance

• True condenser design with 1" large-diaphragm capsule
• 24kt gold-plated diaphragm
• Rugged metal housing
• Internally shock-mounted capsule minimizes structure-borne noise
• Designed for project studios and stage use
• Low inherent self-noise (10 dBA) and high maximum SPL (140 dB)
• Balanced XLR 3-pin output connector
• Requires 48V phantom power
• Includes compact stand mount and drawstring pouch
• Made in Germany

Primary Applications   Studio Recording

Form Factor   Large Diaphragm Mic / Stand/Boom Mount

Intended Sound Sources   Vocals, Speech/Voice Over, Overhead, Instrument

Sound Field   Mono

Operating Principle   Pressure Gradient

Capsule   Condenser

Diaphragm   1" / 25.40 mm

Polar Pattern   Cardioid

Orientation   Side Address

Circuitry   Solid-State

Pad   None

High-Pass Filter   None

Tone Adjustment   None

Gain Adjustment   None

Indicators   None

On-Board Controls   None

Windscreen   None

Frequency Range   20 Hz to 20 kHz

Maximum SPL   140 dB SPL

Off-Axis Rejection   2 dB at 60°
                                12 dB at 120°
                                20 dB at 180°

Impedance   50 Ohms

Load Impedance   1000 Ohms

Sensitivity   25 mV/Pa

Dynamic Range   130 dB

Equivalent Noise Level   10 dB A-Weighted
                                        20 dB CCIR

Output Connectors (Analog)   1 x XLR 3-Pin Male (on Mic)

Headphone Connector   None

Bus Power   None

Operating Voltage   48 V (Phantom Power)

Operating Current Consumption   3.1 mA

Color   Silver

Mounting   Mic Clip/Stand Adapter (Included)

Included Case   Pouch

Included Filters   None

Construction Material   Die-Cast Zinc

Operating Temperature   32 to 72°F / 0 to 40°C

Storage Temperature   -4 to 158°F / -20 to 70°C

Dimensions  ø: 2.2 x L: 6.3" / ø: 5.7 x L: 16 cm

Weight   1.07 lb / 485 g